Package Size; Table 15 Package Size - Fujitsu ETERNUS AX Series Manual

1. ETERNUS AX/HX Installation

Package Size

Package Size
The ETERNUS AX/HX is shipped in cardboard boxes or in a rack. These boxes may not fit through some doorways
or elevators. To make sure that the ETERNUS AX/HX can be moved to the installation site, carefully check the
transport route information.
The following table shows the package size and the maximum package weight of each component.
Table 15 Package Size
Reinforced cardboard for 19-inch racks
Reinforced cardboard for 19-inch wide racks
Controller shelf
Controller shelf (ETERNUS AX4100, ETERNUS HX6100)
Drive shelf
Drive (*3)
Power distribution unit
*1: The size includes the ramp (slope) for the crate package.
*2: This value is used when shelves are not installed in the rack.
*3: When an order for optional drives to be installed in the factory is placed, shelves are shipped with the drives prein-
stalled. When optional drives are ordered without preinstallation, each drive is shipped in an individual package, or in a
box of 6 or 10 drives.
Component
2.5" type
3.5" type
2.5" type
3.5" type
60-drive type
2.5" type
3.5" type
6 drives
10 drives
Package size (W × D × H)
950 × 1,450 × 2,190 mm (*1)
1,030 × 1,550 × 2,170 mm (*1)
810 × 490 × 710 mm
810 × 490 × 710 mm
1,180 × 690 × 700 mm
810 × 490 × 710 mm
810 × 490 × 710 mm
1,180 × 690 × 700 mm
160 × 278 × 106 mm
189 × 300 × 116 mm
330 × 340 × 210 mm
350 × 360 × 290 mm
(540 × 380 × 310 mm) × 2
27
Maximum weight
Approximately 240 kg (*1)
(*2)
Approximately 260 kg (*1)
(*2)
44.5 kg
44.5 kg
140.0 kg
44.5 kg
44.5 kg
140 kg
Approximately 0.5 kg
Approximately 1.2 kg
Approximately 6 kg
Approximately 9 kg
(Approximately 10 kg) × 2
Site Planning Guide