Chapter 2 ETERNUS DX Disk Storage System Installation
2.3 Package Size
2.3
Package Size
The ETERNUS DX Disk storage system is shipped in cardboard boxes. These boxes may not fit through some
doorways or elevators. To make sure that the ETERNUS DX Disk storage system can be moved to the
installation site, carefully check the transport route information. Refer to
(page 27)
for the maximum weight of each enclosure.
The following table shows the package size and the maximum package weight of each component for regions
other than EMEA&I.
Table 2.3
Package size (for regions other than EMEA&I)
Controller enclosure
Drive enclosure
Drive (*1)
Power distribution unit
*1:
When an order for optional drives to be installed in the factory is placed, enclosures are shipped with the drives
preinstalled. When optional drives are ordered without preinstallation, each drive is shipped in an individual
package.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Site Planning-
Component
2.5" type
3.5" type
2.5" type
3.5" type
2.5"
3.5"
1U
2U
Copyright 2013 FUJITSU LIMITED
Package size (W × D × H)
600 × 760 × 240mm
600 × 780 × 240mm
600 × 660 × 240mm
600 × 670 × 240mm
160 × 278 × 106mm
189 × 300 × 116mm
570 × 710 × 160mm
(390 × 590 × 180mm) × 2
35
"2.1 Installation Specifications"
Maximum weight (approx.)
40kg
40kg
40kg
40kg
0.5kg
1.0kg
4kg
(7kg) × 2
P3AM-4822-12ENZ0