Magnetic Sensor (Ezu-Rv3S) - Hitachi EUP-CC531S Instruction Manual

4.2

Magnetic Sensor (EZU-RV3S)

The Magnetic sensor (EZU-RV3S) as shown in Fig.12 is the Magnetic
sensor for EUP-CC531S.
Direction mark
4.2.1 How to attach the Magnetic Sensor
The procedure of attaching the Magnetic sensor is as follow.
1) Confirm that the Magnetic sensor attachment and the Spacer
for EZU-RV3S are disinfected and if necessary sterilized.
2) Connect the probe, operate the ultrasound diagnostic
scanner, and adjust the image according to the instructions
given in the operation manual for the ultrasound diagnostic
scanner.
3) To use RVS (Real-time Virtual Sonography), attach the
Magnetic sensor as shown below.
a) Attach the Spacer to the Magnetic sensor.
b) Insert the Magnetic sensor into the Magnetic sensor attachment with
the correct direction as shown in Fig.13.
Fig.13 How to attach the Magnetic sensor
Fig.12 Magnetic sensor (EZU-RV3S)
Direction mark of
the Magnetic
sensor
Magnetic sensor
attachment
- 19 -
Magnetic Sensor
(white)
Q1E-EP1357