Table of Contents
Advertisement
3) Perform the examination under following procedures.
(1) Insert the probe into patient's body.
(2) Pour an adequate volume of physiological saline into the
protective probe cover.
(3) Perform the examination. Regarding adjustments of image
and so on, refer to the operating manual of the scanner
to which the probe is connected.
(4) When the examination is finished, return physiological
saline in the protective probe cover to the syringe
before removing the probe from the body.
(5) Remove the probe from the body.
4) After using the probe, clean and disinfect and if necessary
sterilize the probe immediately and using RVS, also clean
and disinfect and if necessary sterilize the Magnetic sensor
attachment. In case of using RVS with an EZU-RV2S, also clean
and disinfect/sterilize the Spacer for EZU-RV2S.
5) Store the probe and accessory in the environment indicated
in "7.Maintenance and Safety Inspection".
- 10 -
Q1E-EP1357
Advertisement
Table of Contents
