1.5.7 The Spacer for EZU-RV2S
The Spacer for EZU-RV2S is used for Real-time Virtual
Sonography (RVS) with EZU-RV2S. By using the Spacer, the
Magnetic sensor for EZU-RV2S is attached to the Magnetic sensor
attachment.
Sterilization has not been made to the Magnetic sensor attachment
and the Spacer for EZU-RV2S shipped from the factory. Prior to
use of them, be sure to clean, disinfect and sterilize it.
1.6
Construction
lumen
Axial scan head
Sagittal scan head
Water running port
Applied part
Magnetic sensor attachment (Option)
Spacer for EZU-RV2S (Option)
Immersible part:
Un-immersible part: This part should not be immersed in disinfectant
CAUTION
Immersible part (IPX7)
Luer inlet
This part can be immersed in disinfectant solution and
also can be cleaned by water.
solution and also cannot be cleaned by water.
Fig.1 External view
- 5 -
Cable
Connector
Q1E-EP1357