Use Of Puncture Guide Fixture (Ezu-Pa3U) - Hitachi EUP-CC531S Instruction Manual

3.4

Use of Puncture Guide Fixture (EZU-PA3U)

The process of attaching the Puncture Guide Fixture (EZU-PA3U)
to EUP-CC531S is as follows;
1) Attaching the protective probe cover to the probe is
recommended. (See "3.2 General Instruction")
2) Set the Puncture Guide Fixture on the probe as shown in Fig.5,
and fix it by tightening the screw 1.
3) By loosing the screw 2, the needle holder in which the guide
recess is formed can be moved vertically. The scale on the
Puncture Guide Fixture is of 0.5cm/division.
EZU-PA3U
Screw 2
Sheath
Screw 1
Guide recess
Fig. 5
- 12 - Q1E-EP1357