Table of Contents
Advertisement
4.2
Magnetic Sensor (EZU-RV3S)
The magnetic sensor (EZU-RV3S) as shown in Fig. 8 is also the
magnetic sensor for the EUP-C516.
Direction mark
4.2.1 How to attach the EZU-RV3S
The procedure of attaching the magnetic sensor is as follows.
1)
Confirm that the probe, the magnetic sensor attachments are
cleaned, disinfected or sterilized.
2)
Connect the probe, operate the ultrasound diagnostic scanner,
and adjust the image according to the instructions given in
the operation manual for the ultrasound diagnostic scanner.
3)
To use RVS (Real-time Virtual Sonography), attach the
magnetic sensor as shown below.
a) Attach the magnetic sensor into the probe with the correct direction
as shown in Fig. 9.
Fig. 9 How to attach the Magnetic sensor
Fig. 8
Magnetic sensor (EZU-RV3S)
Magnetic sensor (EZU-RV3S:White)
Direction mark
of the EZU-RV3S
Fit the insertion
direction
Hole of the Magnetic sensor
attachment
-10-
Sensor (white)
Q1E-EP0386
Advertisement
Table of Contents
