Hitachi EUP-CC531S Instruction Manual page 25

4.1.2 How to release the Magnetic Sensor
The procedure of releasing the Magnetic sensor is as follow.
1) Release the Magnetic sensor attachment from the probe as
shown in Fig.10.
Fig.10 How to release the Magnetic sensor attachment
from the probe
2) Release the Magnetic sensor and the Spacer for EZU-RV2S from
the Magnetic sensor attachment as shown in Fig.11.
Fig.11 How to release the Magnetic sensor from the
Magnetic sensor attachment
Clean, disinfect and sterilize the Magnetic sensor attachment and
the Spacer for EZU-RV2S before the first use as there are not
sterilized in the factory.
CAUTION
- 18 - Q1E-EP1357