Analog Devices HSC-ADC-EVALA-SC Manual page 27

Single
Channel
Settings,
Default
Jumper
No. (Bottom)
J402 Position 3
J403 Position 1
1 Can only be used with a dual channel FIFO board. This is essentially a single channel, but using the opposite channel (top FIFO) rather than the standard default
(bottom FIFO).
Dual
Demultiplexed Channel
Settings Settings
Position 3 Position 3
Position 1 Position 1
HSC-ADC-EVALA-SC/HSC-ADC-EVALA-DC
Single
Channel
1
Settings
(Top) Description
Position 3 WEN Select
Position 1 J303 OUT: POS 1 bottom channel, POS 3 Top channel
Rev. 0 | Page 27 of 44