Table of Contents
Advertisement
3.
OPERATING INSTRUCTIONS
The Drywall Sander is designed for sanding walls and ceilings made of drywall or plaster. The
Sander provides superior finish and is faster than conventional finishing methods for both new
construction and renovation work. Clean-up time is minimized by using vacuum cleaner
attached to the Sander.
ABRASIVE DISC SELECTION
The drywall sander is equipped a set of sanding paper (80/100/120/150/180/240). This abrasive
is suitable for most applications. 120 and 240 abrasive discs are available for works requiring a
smoother finish.
CHOOSING THE SANDPAPER
According to the material and grinding effect, choose the appropriate sandpaper.
Material
Pigment
Paint
Filling agent
Interstitial material
Pigment layer drips and
convex surface
Flat bottom material
Replacement of sanding paper
Before installing the new paper, first the grinding wheel must be clear from dirt. The grinding surface
of the adhesive disc has a lint layer, that can quickly and easily be installed flocking self-adhesive
sandpaper. The grinding sandpaper surface has to be pressed on the adhesive disc.
Usage
Removal of pigment layer
Removal of paint
Sanding pigment (such as finishing bottom)
Removal of pickling, sanding residues
Removal brushing marks
Good finished sanding for new painting
Sandpaper
40
60
80
100
120
180-240
Advertisement
Table of Contents
