H3C MSR Series Manual page 32

Predefined user roles
network-admin
Parameters
destination: Changes the TPDU destination addresses of packets.
source: Changes the TPDU originator addresses of packets.
Usage guidelines
The TPDU address change policy can either change the originator or destination TPDU address, but not
both. The most recent configuration overwrites the previous one.
FEPs require the change of either the originator or destination address in the TPDU field. Determine the
TPDU address change policy according to the requirements of FEPs.
In nontransparent mode, modifying the TPDU address change policy also removes all permanent TCP
connections governed by the application template.
Examples
# Configure the router to change the TPDU destination address of packets sent to the FEP that
corresponds to POS application template 1. The application template 1 uses permanent TCP connections
in nontransparent mode.
<Sysname> system-view
[Sysname] posa app 1 type tcp
[Sysname-posa-app1] tpdu-change destination
Connections for the application have been reset
26