Display Posa Status Terminal - H3C MSR Series Manual

Field
Interface
IPAddr:Port
State

display posa status terminal

Use display posa status terminal to view POS terminal state information.
Syntax
display posa status terminal [ terminal-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
terminal-id: Specifies a POS terminal by its ID, in the range of 1 to 255. If no terminal template is
specified, the command displays state information for all POS terminal templates.
Examples
# Display state information for all POS terminal templates.
<Sysname> display posa status terminal
TerminalID
1
Description
Interface of the POS application template.
If no interface is configured, or the POS application is in TCP mode, this field
displays a hyphen (-).
IP address and port number of the FEP for the POS application template.
If no IP address and port number are configured, or the POS application is in flow
mode, this field displays a hyphen (-).
Connection state of the POS application template.
For the flow mode:
•
Up—The connection has been established.
•
Down—The connection has been terminated.
For the TCP mode:
•
Unlinked—The connection has not been established.
•
Linking—The connection is being established.
•
Linked—The connection has been established.
•
Multilink(N)—Multiple TCP connections have been established for the POS
application. N indicates the number of TCP connections.
•
Blocked—The POS application template is blocked due to application fault.
•
Error—The mapping entry for the application template is not available because
the mapping entry failed to be enabled (TCP connection failed to be bound to
a source port).
If no interface, IP addresses or port number is configured, this field displays a
hyphen (-).
Type Interface
TCP -
ListenPort State
2000 Unlinked
7