Activating A Wanderguard Blue Tag With The Detector - Stanley Healthcare WanderGuard BLUE User Manual

Activating a WanderGuard BLUE Tag with the
Detector
To activate a WanderGuard BLUE Tag with your Detector:
1. Turn on WanderGuard BLUE Detector by short-clicking the power
button.
2. Place a WanderGuard BLUE Tag within the Detector's LF range (less than
0.5 meter).
3. Activate the Tag – press the power button for 1.5 seconds.
Detector sends activation message via LF.
Detector beeps to indicate sending activation message.
4. Upon receiving BLE message from the Tag.
LF LED lights green for two seconds.
If more than one Tag sends a BLE message, the LF LED lights Ivory for
two seconds.
5. If the WanderGuard BLUE Manager is in range of the Tag(s), the Scan
feature can display the Tags and their properties in the application.
User and Deployment Guide
72