Mounting The Ex5700 Controller - Stanley Healthcare WanderGuard BLUE User Manual

Configuration of the Slave Exciter:
The EX5700 is defined as the "Master." Other Exciters are designated
1.
"Slave."
The Master Controller is connected to the first Slave Exciter as follows:
2.
Master Chain OUT to Slave Chain IN.
Slave Exciters are then connected as follows: Slave OUT to Slave IN.
3.
The Termination Switch of the Master and the last Slave Exciter in the chain
4.
must be set to On (o-o).
On the other Slave Exciters, it must be set to OFF (-o o-).
For more information on Slave Exciter configuration and mounting, see the
EX3210 and EX5200 deployment guides here.

Mounting the EX5700 Controller

For standard mounting with standard mounting and heavy-duty mounting kits,
see Appendix A.
For mounting using the Controller Wall-mount Bracket, see
User and Deployment Guide
Appendix B.
39