Stanley Healthcare WanderGuard BLUE User Manual page 28

Connector
OUT1 LOCK Follows Relay 1
OUT2 TIF
Tag In Field
Programmable Output 3
OUT3
Programmable Output 4
OUT4
ALARM IN
Controller moves to Alarm mode
OVERRIDE IN
Controller moves to Override
Mode
RS485B
RS485 communication with
Indoor Keypad
RS485A
RS485 communication with
Indoor Keypad
N/C Not connected
N/C Not connected
24-48 V IN Power IN. Accepts 24-48 V Direct
Current
Ground/Earth
GND IN
Relay 1 normally closed
R1 NC
connection
User and Deployment Guide
Purpose Comment
Secure door lock. Follows
relay 1 (if relay 1 is
activated, the output is
activated)
Activated when there is
Tag In Field.
Activated based on
configuration
Activated based on
configuration
Door is in Alarm mode
Door is in override
For future use.
For future use.
Used if the 24-48 VDC
connector is not
connected. Connected to
external power supply.
Used if the 24-48 VDC
connector is not
connected. Connected to
external power supply.
27