Overview; Wired Connections - Stanley Healthcare WanderGuard BLUE User Manual

Overview

The Indoor Keypad does the following:
Connects to EX5700 via RS485
Powered (12 V) by the Controller
Displays the Controller's status/mode on its screen
Displays Controller Error(s) on its screen
Uses LEDs to indicate Controller status
Can use its built-in buzzer to indicate alarms and events
Sends the entered key to the Controller for verification

Wired Connections

The Indoor Keypad is physically connected to the Controller via RS485. The
Outdoor Keypad can be simultaneously connected to the Controller via
Wiegand.
Both Keypads are powered by the Controller (12 V).
Indoor RS-485
Keypad
If only an Outdoor Keypad is connected to the Controller (an Indoor
Keypad is NOT connected), then an error is issued by the Controller. The
Note
Controller's LED color changes to Amber, and an error message is
displayed in the WanderGuard BLUE Manager mobile application:
User and Deployment Guide
Controller Wiegand Outdoor
Keypad
49