Attaching Tags - Stanley Healthcare WanderGuard BLUE User Manual

Attaching Tags

To attach the Tag:
1. To determine the strap size, wrap the sizing tool around the resident's
wrist or ankle, making sure that the logo is facing you. The strap size is
the first number to the right of the measuring bar (in this example, size
10).
2. Select the appropriate WanderGuard BLUE strap from storage (the size is
printed on the box as well as on the inside of the strap).
Measure carefully to ensure that the appropriate strap size is selected.
Once the strap has been attached, it cannot be used again.
Note
3. Slide a WanderGuard BLUE Tag onto the strap, making sure that both
the serial number on the Tag and the size stamp on the strap are facing
you.
4. Position the strap around the resident's wrist or ankle and insert the
free end of the strap into the clasp until it clicks into place.
5. Discard the sizing tool (it may be recycled but not used again).
User and Deployment Guide
18