Ex5700 Controller Firmware Upgrade; Setting Up The Pc - Stanley Healthcare WanderGuard BLUE User Manual

EX5700 Controller Firmware Upgrade

Controller firmware upgrade involves the following steps:
Setting up the PC from which the Controller firmware upgrade is performed
and installing the AeroScout Location Engine (ALE)
Configuring the AeroScout Location Engine
Adding the Controller to the Engine configuration
Performing the upgrade

Setting up the PC

1. Install Engine 5.0 SP4 Manager and Server (non-Cisco platform).
2. Connect the PC-to-LAN connector of the Controller.
3. Set the PC to static IP in the same subnet as the Controller. The
Controller default IP address is: 192.168.1.178.
User and Deployment Guide
42