Function Button Options; Function Button A - Access Granted - Stanley Healthcare WanderGuard BLUE User Manual

Function Button Options

The Visitor and Bypass codes and the time period that the door is open
can be changed in the WanderGuard BLUE Manager. The Alarm Reset
Note
code can also be changed in the WanderGuard BLUE Manager. See
Settings in the Controller Configuration chapter of this User Guide.
Function buttons activate the designated function (Access Granted, Alarm Reset)
after the preset PIN code is entered by a staff member on the Indoor Keypad.
These functions are accessed by keying in the numerical code and then pressing
the designated Letter button (A or B) on the Keypad.
The C and D buttons are reserved for future use.
Note
Function Button A – Access Granted
This function is used together with the Visitor Code or Bypass Code to open the
door. The following are the default codes:
Bypass code – 0000A
Visitor code – 0001A
Entering one of these codes opens the door, and the Indoor Keypad
simultaneously displays an Access Granted message. The Access Granted
function stays active for the designated time period (the default time period is
five seconds).
Access Granted (Visitor)
User and Deployment Guide
55