Stanley Healthcare WanderGuard BLUE User Manual page 14

If it is necessary to extend the EX5700 Controller LF range, for example, to
control two proximate doors by the same Controller, an additional EX5200
Exciter can be chained to the Controller using dedicated ports and a special
cable.
The WanderGuard BLUE Indoor Keypad receives power from the Controller.
Communication between the Controller and Indoor Keypad is by RS485. It has a
display that shows the mode of operation of the system and also reports events.
The Outdoor Keypad also receives its power from the Controller. It
communicates with the Controller via Wiegand output.
The WanderGuard BLUE Manager application is installed on an Asus tablet
(ZenPad 8 Z380M). The application can establish bi-directional BLE
communication with the Controller. The communication is used to configure the
Controller's settings, day/night mode schedule, users' credentials, and other
system properties.
The WanderGuard BLUE Detector is used for several activities:
Tag activation
Checking Tag battery level
Supporting scanning for Tags by WanderGuard BLUE Manager
User and Deployment Guide
13