Advertisement
3
1.
Make sure your PC has workable network settings.
2.
Disable or well configure your Windows firewall and anti-virus firewall first, else the
"Network Scan" on step 4 may not work. (Please contact with your system Administrator)
3.
Check FW/OP DIP switch if it is on OP position(Figure 3-1).
4.
Connect both the EIP-2000 and your computer to the same sub network or the same
Ethernet switch, and power the EIP-2000 on. Please refer to figure 3-2.
EIP-2019 Quick Start
Connecting the Power and PC
Figure 3-1 Mode Switch
Figure 3-2 EIP-2000 module installation
2
Advertisement
