Advertisement
4.
Configuration settings of EIP-2000
For configuration of the Address Type, Static IP Address, Subnet Mask and Default Gateway of the EIP-2000. Please refer
to section "4.2.1 Network Settings"
LED
Power LED
Status LED
Error LED
EIP-2019 Quick Start
(1)
(4)
Figure 4-2 EIP-2000 Utility configurations
Item
IP
Gateway
Mask
LED Status
Always On
Flashing
Always On
Blink per second
Blink per 300 ms
Blink per 100 ms
On/Flashing
Off
Table 4-1 Network Settings
Network Settings
Settings (default)
192.168.255.1
192.168.0.1
255.255.0.0
Table 4-2 LED Indicator
LED Indicator
Description
Module is in Run mode.
Module is in Init mode.
EtherNet/IP connection is failed.
EtherNet/IP connection is successful.
EtherNet/IP disconnected during communication but still in Safe-
Delay time.
Module is about to reboot.
AI status is close to full or out of range.
AI status is within the range of input type.
(2)
(3)
5
Advertisement
