PCMCIA, CF and SD Slots
Summit CF Radio Card
The Summit 802.11b/g radio has two antenna ports.
The Summit CF radio is installed on a PCMCIA adapter. Hold the radio card with the
antenna ports facing down. Connect the antenna cable(s) as follows:
Cisco Radio Card
Hold the radio card with the Cisco logo label facing up. Connect the antenna cable(s) as
follows:
E-EQ-VX6RG-H
•
Summit radio with single antenna – Connect antenna cable to Main port.
Auxiliary port is not used.
•
Summit radio with dual antennas – Connect antenna cables to both Main and
Auxiliary ports.
Figure 2-35 Summit 802.11b/g Antenna Cable Connections
•
Single antenna – Connect antenna cable to right port, as shown below.
•
Dual antennas – Connect antenna cables to both ports.
Left Port
Figure 2-36 Cisco Antenna Cable Connections
Main
Auxiliary
Port
Port
Right Port
VX6 Reference Guide
65