Install Pcmcia Cards; Install The Type Ii Pcmcia Radio; Figure 2-33 Inserting The Type Ii Pcmcia Radio - LXE VX6 Reference Manual

PCMCIA, CF and SD Slots

Install PCMCIA Cards

Equipment Needed: Phillips No. 1 screwdriver and a Torque wrench capable of measuring to 9±1
inch pounds (1.016±.11 N/m).
Note:
The radio card is installed in slot A (the upper slot). When a second PCMCIA card is present,
such as a Bluetooth CF card via a PCMCIA adapter, the second card is installed in Slot B (the
lower slot).

Install the Type II PCMCIA Radio

Caution
!
1. Turn the VX6 off and detach the power cable.
2. Loosen the three (3) Phillips head screws securing the access panel cover so the cover can
be removed. The screws are a captive part of the cover and cannot be removed.
Partially insert the Type II PCMCIA Radio into Slot A (the upper right slot).
Caution
Note:
E-EQ-VX6RG-H
The example below details installing a wireless radio card.
PCMCIA cards is similar, except there is no antenna.
The LXE Model VX6 Vehicle Mount Computer is specifically for use with LXE
Model 6726, 6816, 4830 and 4831 Type II PCMCIA radios. Substitution of
other PCMCIA radios will void the FCC, Industry Canada and other
international radio certifications for the Model VX6 Vehicle Mount Computer
and is strictly prohibited.
Slot A MUST BE used for the radio card. Installing a radio card in Slot B can
result in pinching or other damage to the internal antenna cable.
!
Radio Card

Figure 2-33 Inserting the Type II PCMCIA Radio

The tethered access panel cover is not shown in the illustration above.
SD CF ATA
PCMCIA A
PCMCIA B
63
Installation of other
VX6 Reference Guide