Vx6 Without Label; Figure 1-14 About Tab And Bluetooth Address - LXE VX6 Reference Manual

22
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED
flashes. Refer to the following section titled "Bluetooth Beep and LED Indications".
Note:

VX6 without Label

If the VX6 Bluetooth address barcode label does not exist, follow these steps to create a unique
Bluetooth address barcode for the VX6:
First, locate the VX6 Bluetooth address by tapping Start | Settings | Control Panel | Bluetooth |
About tab.
Next, create a Bluetooth address barcode label for the VX6
The format for the barcode label is as follows:
• Barcode type must be Code 128.
• FNC3 character followed by string Uppercase L, lowercase n, lowercase k, uppercase B
and then the Bluetooth address (12 hex digits, no colons). For example,
LnkB0400fd002031.
Create and print the label.
Scan the VX6 Bluetooth address barcode label with the Bluetooth barcode reader.
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED
flashes. Refer to the following section titled "Bluetooth Beep and LED Indications".
Note:
1
Free barcode creation software is available for download on the World Wide Web. Search
using the keywords "barcode create".
VX6 Reference Guide
After scanning the VX6 Bluetooth label, if there is no beep and no LED flash from the
Bluetooth device, the devices are currently paired.

Figure 1-14 About tab and Bluetooth Address

After scanning the VX6 Bluetooth label, if there is no beep and no LED flash from the
Bluetooth device, the devices are currently paired.
1
.
E-EQ-VX6RG-H
Bluetooth