Bluetooth Lxez Pairing - LXE VX6 Reference Manual

Hardware Configuration

Bluetooth LXEZ Pairing

The VX6 contains Bluetooth version 2.0 with Enhanced Data Rate (EDR) up to 3.0 Mbit/s over
the air. Bluetooth device connection (or pairing) can occur at distances up to 32.8 ft (10 meters)
Line of Sight. The wireless client retains wireless connectivity while Bluetooth is active.
The user will not be able to select PIN authentication or encryption on connections from the HX3.
However, the HX3 supports authentication requests from pairing devices. If a pairing device
requests authentication or encryption, the VX6 displays a prompt for the PIN or passcode.
Maximum encryption is 128 bit. Encryption is based on the length of the user's passcode.
Bluetooth will simultaneously support one printer as a slave Bluetooth device and one scanner,
either as a slave or as a master Bluetooth device.
See Chapter 3 System Configuration, control panel section titled Bluetooth.
Notes
• The VX6 does not have a Bluetooth managed LED.
• The LED on the Bluetooth scanner illuminates during a scanning operation.
• Barcode data captured by the Bluetooth scanner is manipulated by the settings in the VX6
Scanner Properties control panel applet.
• Multiple beeps may be heard during a barcode scan using the Bluetooth scanner; beeps
from the Bluetooth scanner as the barcode data is accepted/rejected, and other beeps from
the VX6 during final barcode data manipulation.
E-EQ-VX6RG-H
33
VX6 Reference Guide