Function
Speed Mode
Screenshot
Reset
Setup
1. Connect the power via the Power socket.
2. Insert the SD card into the Side of the Unit. The SD Card Icon should display as green as long as the card has
free space.
Behaviour
When a Finish Line is cleared,
the LEDs will briefly
flash green twice.
When a Standing Start is Enabled
or Disabled, the LEDs will briefly
flash green twice.
If a Target Speed LED Alert has
been set, the LEDs will flash green
when the value is reached.
If a screenshot has been saved
successfully, the LEDs will illuminate
yellow in sequence from left to right
to display the progress of writing to
the SD card.
The LEDs will briefly
flash green twice when a screen
has been reset.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V2/
Quick_Start_Guides_%E2%80%93_VBOX_Touch_V2/VBOX_Touch_V2_Accel_Mode_-_Quick_Start_Guide
Colour
11
Need help?
Do you have a question about the VBOX Touch V2 and is the answer not in the manual?