Field Exit Key Function (Ibm 5250/Tn5250 Only); Scan Buttons And The Scnr Led - LXE MX3Plus User Manual

36

Field Exit Key Function (IBM 5250/TN5250 Only)

The Field Exit key is used to exit an input field. If the field is an Auto Enter field, the
auto transmit function is activated. This key function is present on the IBM
5250/TN5250 specific keypad only.

Scan Buttons and the SCNR LED

The SCNR LED, located above the keypad, illuminates during an integrated barcode scanner
function. It is affected by internal scanner algorithms.
The Scan buttons have no effect on tethered barcode scanners connected to a serial port. Tethered
scanners read barcode scans only when the trigger on the tethered scanner is pressed. Pressing the
trigger on the tethered scanner has no effect on the device's Scan buttons.
Note:
The System Administrator can program the Scan buttons for alternate functions. Details are in the
MX3Plus Reference Guide.
MX3Plus User's Guide
•
Red – scanning.
•
Green – good scan.
•
Unlit – laser scanner is inactive.
Refer to the MX3Plus Reference Guide before programming the Scan / Enter buttons.
The Reference Guide also contains instructions for the Key Map Utility for the keypad.
Touchscreen Display
E-EQ-MX3PLUSOGWW-B