V-RTU2000 Series
Veesta - Remote Terminal Unit
Technical Specification Manual
14.5
VR-2103 Sub rack
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization.
This sub rack is suitable for any application of remote terminal unit.
There is one slot of Power Supply module and one slot of CPU card.
There are 16 slots available for any type of IO cards.
Dimension of sub rack is 3U x 84T x 185mm (H*W*D). Each "U" unit
is 1.75" inches (~44.5mm) vertically dimension and each "T" unit is
0.2" inches (~5.1mm) horizontally dimension of sub rack.
dimensions in the picture bellow have +1 mm tolerance. This is 19"
standard sub rack that can be installed in any standard 19" racks.
Figure 14-4: VR-2103 Sub Rack detail Dimension
Chapter 14 - Dimensions
Page 89 of 90
All