V-RTU2000 Series
Veesta - Remote Terminal Unit
Technical Specification Manual
Chapter 6 -
6.1
General
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization.
Digital Output Unit
The V-RTU2000 Series unit comprises two DO cards, namely, DO
Card and HDO Card. The DO Card is used in smaller current control
application. The HDO (High density DO) Card provides 10A
(2000VA, 200W) contact capacity of relay for application using. It
provide 4 Select Relays (CH1~CH4) and 1 Main Execution Relay.
For application, DO Card and HDO Card can be defined as:
Trip / Close Control Output
Raise / Lower AGC Control Output
The DO Card and HDO Card output can be defined as Pulse Output
or Level Output.
Chapter 6 - Digital Output Unit
Page 45 of 90