V-RTU2000 Series
Veesta - Remote Terminal Unit
Technical Specification Manual
9.3
ACV Card
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization.
The design concept of Model VR-2746 ACV card was based on
Microprocessor. It uses 12 bit A/D to design its voltage module cards
for voltage measurement of RTU. Its back side of communication
port is using the protocol of RTU Local I/O, while the frond RS-232
communication port is for maintenance only. And this RS-232 port is
easy accessed and programmed by PC Tool to setup the parameters
and records.
The ACV Card Features:
4 sets AC voltage input : 0-300V
Each sampling cycle : 32 points
True RMS converter
Accuracy : ≦ 0.5% fs
Field programmable PT ratio
Instant maximum and minimum logger
Event record : 32 events
Data updating interval : 1 second
Communication port : RS-485 + RS-232
Completely modulated and plug-in type cards which is easy to
maintain
Chapter 9 - Analog AC Input Unit
Page 54 of 90