V-RTU2000 Series
Veesta - Remote Terminal Unit
Technical Specification Manual
3.2.1
Detailed Circuit Description
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization.
The basic functions of backplane are as listed below:
Buffering the required power of Logical Cards (DC 5V).
Buffering the required power for the Relay on DO, HDO Cards
(DC 24V ).
Providing communication line for LIOC Communication
Providing the "Addressing" of Logical Cards
The backplane provides 3 kinds of slot for connecting different cards.
Power Slot
(x 1): DC 5V & 24V PS Card
CPU Slot
(x 1): CPU Card (main)
I/O Slot
(x N) : I/O Cards or CM Cards or IO CPU Cards
Block diagram of Backplane is shown in Figure 3-1:
Chapter 3 - Main Unit
Page 29 of 90