V-RTU2000 Series
Veesta - Remote Terminal Unit
Technical Specification Manual
14.4
VR-2102 Sub rack
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization.
This sub rack is suitable for a feeder terminal unit application. There
is one slot of Power Supply module and one slot of CPU card. 8 slots
are available for any type of IO cards.
Dimension of sub rack is 3U x 42T x 185mm (H*W*D). Each "U" unit
is 1.75" inches (~44.5mm) vertically dimension and each "T" unit is
0.2" inches (~5.1mm) horizontally dimension of sub rack.
dimensions in the picture bellow have +1 mm tolerance. The Cut Out
size for any panel mount usage is 228
Figure 14-3: VR-2102 Sub Rack detail Dimension
Chapter 14 - Dimensions
+1
+1
x133
mm.
Page 88 of 90
All