Huawei FusionModule 500 Quick Manual page 26

3.8 Commissioning Sensors
Item Check Method
Simulate a smoky
Smoke
environment under
detector
the smoke detector.
WLDS900 Immerse the water
water detection cable in
sensor water.
Immerse the two
Electrode
contacts of the
Water
electrode water
Sensor
sensor in water.
Check the running
information about
the T/H sensor on
the WebUI.
T/H sensor
Set T/H sensor
alarm thresholds.
3.9 Commissioning Event Notification
1. Choose System Settings > Event Notification.
2. Set outbox parameters.
3. Add an email address for receiving emails.
4. Add a mobile number for receiving event notifications.
5. Set the alarm notification delay time and add alarm notification parameters.
6. Click Confirm. In the re-authentication dialog box, enter Login password and click Submit.
Commissioning Cameras and a VCN / IVS1800 (LAN Switch
3.10
Networking Scenario)
Commissioning Cameras
Perform the following steps according to the
1. Log in to the camera WebUI.
2. For details about how to commission IP cameras and set parameters for them, see the
documentation delivered with the equipment or obtain the documentation by referring to the
"Preparing Documentation" section.
Commissioning Cameras (SD Card Configured)
1. Log in to the Huawei camera WebUI.
2. For details about how to commission IP cameras and set parameters for them, see the
documentation delivered with the equipment or obtain the documentation by referring to the
"Preparing Documentation" section.
Normal Connection Status
Smoke DI alarm is displayed on the active alarm page of the
app or WebUI.
Leak DI alarm is displayed on the active alarm page of the
app or WebUI.
Choose Monitoring > Aisle > T/H Sensor Group > T/H
n
Sensor > Running Info to view the temperature and
humidity of the cabinet.
Choose Monitoring > Aisle > T/H Sensor Group > T/H
n
Sensor > Running Parameters, and set High temperature
alarm threshold, Low temperature alarm threshold, High
humidity alarm threshold, and Low humidity alarm
threshold as required.
The default values of High temperature alarm threshold,
Low temperature alarm threshold, High humidity alarm
threshold, and Low humidity alarm threshold are 35.0°C,
5.0°C, 85.0% RH, and 15.0% RH respectively.
Huawei C Series SDC 8.0.RC111 Product Document
25
: