Table of Contents
Advertisement
16.12 MTU ADEC(SMART MODULE)
It is suitable for MTU engine with ADEC (ECU8) and SMART module.
Terminals of controller
Fuel relay output
Start relay output
Terminals of controller
CAN GND
CAN(H)
CAN(L)
Engine type: MTU-ADEC
16.13 MTU ADEC(SAM MODULE)
It is suitable for MTU engine with ADEC (ECU7) and SAM module.
Terminals of controller
Fuel relay output
Start relay output
Terminals of controller
CAN GND
CAN(H)
CAN(L)
Engine type: Common J1939
16.14 PERKINS
It is suitable for ADEM3/ ADEM4 engine control module. Engine type is 2306, 2506, 1106, and
2806.
Terminals of controller
Fuel relay output
Start relay output
CAN GND
CAN(H)
CAN(L)
Engine type: Perkins
HGM9510 Genset Parallel Unit
HGM9510 GENSET PARALLEL UNIT
ADEC (X1port)
X1 10
X1 34
SMART (X4 port)
X4 3
X4 1
X4 2
ADEC (X1port)
X1 43
X1 37
SAM (X23 port)
X23 3
X23 2
X23 1
Connector
1,10,15,33,34
-
-
31
32
ISSUE 2013-08-06
Remark
X1 Terminal 9 Connected to negative of
battery
X1 Terminal 33 Connected to negative of
battery
Remark
CAN
communication
line(connect to controller's this terminal
only)
Using impedance 120Ω connecting line
Using impedance 120Ω connecting line
Remark
X1 Terminal 28 Connected to negative of
battery
X1 Terminal 22 Connected to negative of
battery
Remark
CAN
communication
line(connect with controller's this terminal
only)
Using impedance 120Ω connecting line
Using impedance 120Ω connecting line
Remark
Connect to starter coil directly
CAN
communication
line(connect with controller's terminal
only)
Using impedance 120Ω connecting line
Using impedance 120Ω connecting line
Version 1.1
shielding
shielding
shielding
Page 61 of 65
Advertisement
Table of Contents
