Table of Contents
Advertisement
16.3 CUMMINS QSM11(IMPORT)
It is suitable for CM570 engine control module. Engine type is QSM11 G1, QSM11 G2.
Terminals of controller
Fuel relay output
Start relay output
Terminals of controller
CAN GND
CAN(H)
CAN(L)
Engine type: Cummins ISB
16.4 CUMMINS QSX15-CM570
It is suitable for CM570 engine control module. Engine type is QSX15.
Terminals of controller
Fuel relay output
Start relay output
Terminals of controller
CAN GND
CAN(H)
CAN(L)
Engine type: Cummins QSX15-CM570
16.5 CUMMINS GCS-MODBUS
It is suitable for GCS engine control module. Use RS485-MODBUS to read information of engine.
Engine types are QSX15, QST30, QSK23/45/60/78 and so on.
Terminals of controller
Fuel relay output
Start relay output
Terminals of controller
RS485 GND
RS485+
RS485-
Engine type: Cummins QSK-MODBUS, Cummins QST-MODBUS, Cummins QSX-MODBUS
HGM9510 Genset Parallel Unit
HGM9510 GENSET PARALLEL UNIT
C1 connector
5&8
-
3 pins data link connector Remark
C
A
B
50 pins connector
38
-
9 pins connector
SAE J1939 shield-E
SAE J1939 signal-C
SAE J1939 return-D
D-SUB connector 06
5&8
-
D-SUB connector 06
20
21
18
ISSUE 2013-08-06
Remark
Outside expand relay, when fuel output,
making port 5 and port 8 of C1 be
connected
Connect to starter coil directly
CAN
communication
line(connect with ECU terminal only)
Using impedance 120Ω connecting line
Using impedance 120Ω connecting line
Remark
Oil spout switch
Connect to starter coil directly
Remark
CAN
communication
line(connect with ECU terminal only)
Using impedance 120Ω connecting line
Using impedance 120Ω connecting line
Remark
Outside expand relay, when fuel output,
making port 05 and 08 of the connector
06 be connected.
Connect to starter coil directly
Remark
CAN
communication
line(connect with ECU terminal only)
Using impedance 120Ω connecting line
Using impedance 120Ω connecting line
Version 1.1
shielding
shielding
shielding
Page 58 of 65
Advertisement
Table of Contents
