Table of Contents
Advertisement
5 OPERATION
5.1 INDICATOR LIGHT
NOTE: Selected light indicators description:
Warning indicator and Alarm indicator:
Alarm Type
Warning
Trip Alarm
Shutdown Alarm
Trip and Stop Alarm
Running indicator: illuminated from crank disconnect to ETS while off during other periods.
Genenerator normal light：It is light on when generator is normal; flashing when generator state is
abnormal; off when there is no generator power.
5.2 PUSHBUTTONS
Stop
Start
Manual Mode
Auto Mode
HGM9510 Genset Parallel Unit
HGM9510 GENSET PARALLEL UNIT
Warning Indicator
Slow flashing
Slow flashing
Off
Off
Stop running generator in Auto/Manual mode; Lamp test
(press at least 3 seconds); Reset alarm in stop mode;
During stopping process, press this button again to stop
generator immediately.
Start genset in Manual mode.
Press this key and controller enters in Manual mode.
Press this key and controller enters in Auto mode.
ISSUE 2013-08-06
Alarm Indicator
Slow flashing
Slow flashing
Fast flashing
Fast flashing
Version 1.1
Page 10 of 65
Advertisement
Table of Contents
