Advertisement
Quick Links
Advertisement
Related Manuals for Smartgen SG361
Summary of Contents for Smartgen SG361
- Page 1 SG361 GSM/GPRS Module USER MANUAL Smartgen Technology...
- Page 2 (including photocopying or storing in any medium by electronic means or other) without the written permission of the copyright holder. Smartgen Technology reserves the right to change the contents of this document without prior notice. If colors of actual products are different from those mentioned within this manual, please take the actual product as the standard.
-
Page 3: Table Of Contents
SG361 GSM/GPRS Module Contents 1 OVERVIEW ....................... 4 2 PRODUCT FEATURE ..................5 TECHNICAL PARAMETERS ..............5 STRUCTURE ..................6 3 TYPICAL APPLICATION AND INSTALLATION STEPS ........7 TYPICAL APPLICATION ................ 7 INSTALLATION STEPS ................. 7 INSTALLATION ..................8 SG361 GSM/GPRS Module Version 1.0... -
Page 4: Overview
SG361 GSM/GPRS Module 1 OVERVIEW SG361 GSM/GPRS Module has SMS (Short Message Service) function and GPRS data transmission function. SG361 GSM/GPRS Module Version 1.0 2014-02-23 Page 4 of 8... -
Page 5: Product Feature
SG361 GSM/GPRS Module 2 PRODUCT FEATURE 2.1 TECHNICAL PARAMETERS Power supply: DC( 8~32)V； Four-frequency GSM/GPRS module; Working frequency: GSM/GPRS 850/900/1800/1900MHz; Control (GSM 07.07, 07.05) via AT command; GPRS multi-slot class 10/8; GPRS mobile station class B;... -
Page 6: Structure
SG361 GSM/GPRS Module 2.2 STRUCTURE 1、 TERMINAL TX： Sending end; connect to RX of RS232 interface. RX： Receiving end; connect to TX of RS232 interface. GND：Ground wire; connect to ground wire of RS232 interface. B+： Positive power supply; voltage range: (8~32)V B-：... -
Page 7: Typical Application And Installation Steps
The power should not less than 5W to ensure the operation is smoothly as the power supply voltage of the SG361 module is DC(8~32)V. The system is normal running if the network status indicator is “64ms On/300ms Off” and users can control data transmission via AT command. -
Page 8: Installation
SG361 GSM/GPRS Module 3.3 INSTALLATION It is fixed by two M3 screws when installed and the center distance is 61.5mm. The overall dimensions please refers to as following: SG361 GSM/GPRS Module Version 1.0 2014-02-23 Page 8 of 8...