Antenna Configuration Example - Siemens SIMATIC RF610R System Manual

Hide thumbs Also See for SIMATIC RF610R:
Table of Contents

Advertisement

RF600 system planning
4.3 Antenna configurations
4 4 .3.1

Antenna configuration example

The following figure shows an example of an application with an antenna configuration of the
RF650R. The antennas are positioned at the height at which the transponders to be
identified are expected. The maximum width of the portal recommended for reliable
operation is 4 m.
The diagram shows a configuration with three antennas. Up to four antennas can be used
depending on the local conditions.
Figure 4-6
Example of an antenna configuration with three antennas
40
System Manual, 06/2019, J31069-D0171-U001-A22-7618
SIMATIC RF600

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic rf600Simatic rf615r

Table of Contents