Danfoss ET6200 Operator's Manual page 25

CAUTION!
Risk of squeezing
There is a risk of injury from the clamping device when closing
the protective cover.
•
Make sure that no extremities are in the working area behind
the protective cover.
7. Close protective cover (1).
8. Move the hand lever (3) to the PUSH position.
9. Open protective cover (1).
10. Remove the workpiece.
11. Close protective cover (1).
12. Move the hand lever (3) to the STOP position.
The movement of the inserter cylinder can be stopped at any time.
To do this, move the hand lever to the STOP position.