Decommissioning, Disposal; Dismantling; Recycling; Consumables And Waste - Danfoss ET6200 Operator's Manual

8

Decommissioning, disposal

8.1

Dismantling

8.2

Recycling

8.3

Consumables and waste

CAUTION!
Risk of injuries!
Parts of the machine/unit may be under pressure and/or tension.
Loosening components may impose a risk of injuries!
•
De-pressurize the machine/unit before performing any work
and check for potential sources of hazard.
This section describes activities to be performed by you as the opera-
tor to ensure the safe dismantling of the machine/unit.
•
The device may only be dismantled by entrusted and qualified
staff.
•
Disconnect the machine/unit from the pressure supply before
dismantling and depressurise it.
•
Check the device for mechanical tension and consider it during
dismantling.
The machine/unit contains metal, hydraulic hoses, electric cables and
electronic components, depending on the type.
As regards disposal, the applicable national environmental protection
and waste disposal regulations have to be complied with.
Observe applicable national environmental protection and waste dis-
posal regulations.
Return consumables, e.g. oils, greases, test media, to supplier - they
are hazardous waste. Also observe the information given on the
safety data sheet.