EAS Electric M-THERMAL 2 BIBLOCK Instruction Manual page 52

4/6 kW
Wiring diagram:8/10kW for example
Refrigerant System
Please remove the hollow
plate after installation.
Please remove the noise insulation cover of the compressor first.
Please make sure the transportation support had be removed.
It will cause heat pump abnormal vibration and noise if running with transportation support for compressor installed.
Please wear gloves when doing the above operation to prevent hand scratches.
Please restore the noise insulation cover after removing the transportation support.
Electric Control System
NOTE
01
8/10/12/14/16 kW
4/6 kW
12/14/16 kW 8/10 kW
Remove the
transportation support
12/14/16 kW
V.2