Receiving Messages - Yaesu FT2DR Instruction Manual

APRS message screen and operating instructions
®

Receiving messages

When a message is received, a pop-up screen appears, together with a "pee po pee
po... ( )" audio alarm and a flashing strobe (white LED), followed by the screen
below.
Touch [F MW] in the frequency display screen followed by [M.LIST] to display the APRS
MESSAGE LIST screen.
Reference Touch
1
Turn the DIAL to select a received message
Turn the DIAL to scroll the screen up and down and select a received message.
2
Press the
The APRS MESSAGE LIST detail screen will appear for you to check the message.
Reference
Touch
3
Press the
Return to the APRS MESSAGE LIST screen.
Tips
• A "pee po pee po pee po... (
bulletin message is received and the call sign will be displayed as shown
in the right screen.
• A "pee... ( )" alarm will sound when a message ACK is received and the
"AM>(call sign)" will be displayed on the screen.
• A "pee.... ( )" alarm will sound when a message REJ (reject) is received
and the "RM>(call sign)" will be displayed on the screen.
• The operation of the flashing (white LED) display can be changed by
selecting [APRS] → [5 APRS MSG FLASH] in the set mode.
• The ACK/REJ display can be changed by the [APRS] → [9 APRS POPUP] setting in the set mode.
followed by [S.LIST] to move to the APRS STATION LIST screen.
key
followed by [MSG EDIT] to display the message edit screen.
key
Turn the
DIAL
)" alarm will sound when a group/
Press the
Press the
46
key
key