3.0 Pre-Installation Checklist - MKS Spectra-Physics InSight X3+ Pre-Installation Manual

Before the arrival of your Spectra-Physics Service Engineer please review the following pre-
installation requirements. When all the requirements have been met, fax a signed copy to the
Spectra-Physics Service department at (408) 980-6921 or email a signed copy to
service@spectra-physics.com.
3.0 Pre-installation Considerations
Physical Location:
_ A location with adequate clearance around system to conduct service and accessible by
Spectra-Physics personnel.
_ A temperature-controlled room.
_ Utility services have been installed.
_ Local building and safety codes are complying and have been verified.
When Your System Arrives:
_Upon receiving your system, immediately inspect the outside of the shipping containers. If there
is any sign of damage immediately call Spectra-Physics and file a claim with the carrier.
_ Spectra-Physics crates have been engineered to protect the equipment.
_ The InSight X3 laser system will be installed on site by a factory-trained installation engineer. Do
not open the laser packaging prior to the engineer's arrival unless specifically told to do so by
the factory.
(Two or more people will be required to lift some equipment.)
_ Compare the packing list with your quotation. Call your Spectra-Physics office about any
discrepancies.
_ Check that all manuals were received. Manuals are installed on the USB stick.
_ Save all packing and shipping material until the installation has been completed.
_ Obtain the correct safety glasses and a power meter.
_ Read the User's Manual section.
_____________________________________
Customer Signature
_____________________________________
Phone Number
_____________________________________
E-mail
MKS INSTRUMENTS, INC.
SPECTRA-PHYSICS LASERS
MKS Spectra-Physics
www.spectra-physics.com
_____________________
Date
_____________________
Fax Number
_____________________
Sales Order Number
6