Display Brightness; Restore Factory Settings - Jura GIGA X8 Instructions For Use Manual

4 Permanent settings in programming mode

Display brightness

Restore factory settings

34
T Move your finger across the display until
is displayed in the center.
T Touch 'Choose
'Choose language'
T Move your finger across the display until the desired
language, e.g. 'Deutsch', is displayed in the center.
T Touch 'Save'.
'Enregistrer' appears briefly on the display.
'Langue'
T Touch
'Retour'
start screen again.
In the program item
display brightness (as a percentage).
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Machine settings'
T Press the Rotary Switch.
'Switch off after'
T Move your finger across the display until
displayed in the center.
T Touch 'Display'.
'Display'
T Now move your finger to the left or right to change the
setting.
T Touch 'Save'.
'Saved' appears briefly on the display.
'Display'
T Touch
'Back'
start screen again.
In the program item
machine can be reset to its factory setting: All user settings (apart
from the 'water hardness') are reset to factory settings. Your GIGA
then switches off.
language'.
the number of times needed to display the
'Machine settings' /
'Machine settings'
the number of times needed to display the
'Machine settings'
'Choose language'
'Display' you can set the
is displayed.
'Display'
/ 'Factory setting'
is
the