Setting The Water Hardness - Jura GIGA X8 Instructions For Use Manual

4 Permanent settings in programming mode
Setting the water
hardness
30
Example: Proceed as follows to set the GIGA to switch on on
Mondays at a time defined by you.
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Machine settings'
T Press the Rotary Switch.
'Switch off after'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Timer'
T Touch 'Monday'.
'Switch machine on'
T Enter the desired switch-on time.
T Touch 'Save'.
'Switch machine off'
T Touch 'Back'
screen again.
The harder the water is, the more frequently the GIGA needs to be
descaled. It is therefore important to set the water hardness
accurately.
The water hardness was set when the machine was first used. You
can change this setting at any time.
The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Machine settings'
T Press the Rotary Switch.
'Switch off after'
'Machine settings'
'Timer'
the number of times needed to display the start
'Machine settings'
is displayed.
is displayed.
is displayed.