Connecting Milk; Settings By The Service Technician - Jura GIGA X8 Instructions For Use Manual

1 Preparing and using for the first time

Connecting milk

Settings by the service
technician
14
'Filter is being
into the drip tray.
'System is filling', water flows out of the dual spout and the
hot-water spout.
'Empty drip tray'
T Empty the drip tray and put it back into the machine.
'Filter operation'
T Place a receptacle under the dual spout.
'Machine is heating'
'Machine is rinsing',
stops automatically. The start screen is displayed. Your GIGA
is ready for use.
E If the filter is active, this is indicated by a blue filter symbol at
the top of the display.
Your GIGA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 39–46 °F (4–8 °C). We would therefore
recommend using a JURA milk cooler.
T Connect the milk pipe to the dual spout. To do this, attach
the end of the milk pipe to the connector on the right-hand
side of the dual spout.
T Connect the other end of the milk pipe to a milk cooler.
Your authorized JURA service technician can change various
settings, e.g.:
U
Codes: Four codes can be assigned. For each code, you can
define which program items are available or disabled. Each
code corresponds to different authorizations. For instance,
you can define that initiation of the maintenance programs is
disabled using a code.
U
Activating/deactivating the 'Silent Pump' function (for
preparing hot water)
U
Choose not to display the red speedometer symbol for speed
specialty coffees on the start screen.
rinsed', the filter is rinsed. Water flows directly
/ 'Saved'
'Milk system is being rinsed'. The rinse