Language
Display brightness
T Now move your finger across the controller to close the lock
symbol.
T Touch 'Save'.
'Saved'
appears briefly on the display.
'Lock/enable'
T Touch
'Back'
the number of times needed to display the start
screen again.
In this programme item you can set the language used by your
GIGA.
Example: Proceed as follows to change the language from
to 'Deutsch'.
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Machine settings'
T Press the Rotary Switch.
'Switch off after'
T Move your finger across the display until
is displayed in the centre.
T Touch
'Choose
'Choose language'
T Move your finger across the display until the desired lan-
guage, e.g. 'Deutsch', is displayed in the centre.
T Touch 'Save'.
'Gespeichert'
'Sprachauswahl'
T Touch
'Zurück'
start screen again.
In the programme item
display brightness (as a percentage).
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
4 Permanent settings in programming mode
'Machine settings'
language'.
appears briefly on the display.
the number of times needed to display the
'Machine
settings' /
'English'
is displayed.
'Choose language'
'Display'
you can set the
35