Automatic Switch-Off - Jura GIGA X8 Instructions For Use Manual

4 Permanent settings in programming mode

Automatic switch-off

28
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Machine settings'
T Press the Rotary Switch.
'Switch off after'
T Turn the Rotary Switch until
played.
T Press the Rotary Switch.
'Left grinder'
T Touch 'Save'.
'Right grinder'
T Turn the Rotary Switch to change the setting.
T Touch 'Save'.
'Saved' appears briefly on the display.
'Set consistency of grind'
T Touch
'Back'
start screen again.
By instructing your GIGA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your GIGA switches off automatically after the preset time following
the last action on the machine.
You can set the automatic switch-off to 15 minutes, 30 minutes or
1 – 15 hours.
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Machine settings'
T Press the Rotary Switch.
'Switch off after'
T Now move your finger to the left or right to change the
switch-off time.
'Machine settings'
'Set consistency of grind'
the number of times needed to display the
'Machine settings'
is displayed.
is dis-
is displayed.