Cleaning The Bean Container - Jura GIGA X8 Instructions For Use Manual

5 Maintenance
Cleaning the bean
container
44
T Completely dissolve 4 JURA descaling tablets in a receptacle
holding 800 ml of water. This may take several minutes.
T Pour the solution into the empty water tank and insert it
into the machine.
'Press the Rotary Switch'
T Place one receptacle under the dual spout and another
under the hot-water spout.
T Press the Rotary Switch.
'Machine is being
drip tray and out of the hot-water spout and dual spout
repeatedly.
The operation is interrupted,
T Empty the drip tray and coffee grounds container and put
them back into the machine.
'Fill water tank'
T Empty the receptacles and place them back under the dual
spout and the hot-water spout.
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
'Press the Rotary Switch'
T Press the Rotary Switch.
'Machine is being
continued. Water flows straight into the drip tray and out
of the hot-water spout and dual spout repeatedly.
'Empty drip tray'
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. The start screen is displayed.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean containers. These traces may negatively affect
the coffee result. For this reason, clean the bean containers from
time to time.
descaled', water flows straight into the
'Empty drip
descaled', the descaling operation is
tray'.